Keypad ‘5’ not working on ‘Windows’ command set

Product Compare Forums Multi-Edit Support Keypad ‘5’ not working on ‘Windows’ command set

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #2949
    mdpowersslo
    Participant

    Hi,

    This may have been brought up before, sorry if it is an old question.

    I’ve been using MutliEdit since about 1997, have always loved it; I’m currently using v 11.04.00. I’ve always taken the default ‘CUA’ command set and modified it to behave more like Windows, since that is where I normally work. I recently switched to the ‘Windows’ command set … and have noticed that the ‘5’ key in the numeric keypad does not work, but ONLY in MultiEdit; it works everywhere else.

    How do I modify the keymap to get the ‘5’ key to work?

    #9522
    Clay Martin
    Keymaster

    Hi,
    In my command map 5 on the keypad is assigned to Center Line in Screen. If you go to Tools-Custoimize-Keys/Commands and do a search on that key (as primary key) you can find out what it is assigned to and either un-assign it (to get the 5 back) or assign it to some other command.

    Thanks,
    Clay

    #9523
    mdpowersslo
    Participant

    That did it Clay! Thanks muchly!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.